产品中心
VTM42 Vane Pumps
Product Detail
Model Number Designation
| VTM-42 | (A) | 40 | 15 | 20 | -F | 11 | -R | 1 | -14 |
| Vane type mobile pump Series | Mounting flange | Ring size - delivery | Controlled flow rate | Relief valve setting (cracking pressure) | Reservoir filter | Reservoir or manifold | Shaft rotation | Shaft type | Design |
| A – SAE A mounting flange (Omit if not required) | (SAE rating - 1200 rpm & 7 bar (100 psi) 10 – 1.0 USgpm 15 – 1.5 USgpm 20 – 2.0 USgpm 40 – 4.0 USgpm 50 – 5.0 USgpm 60 – 6.0 USgpm | (at 1500 rpm & 7 bar (100 psi) 15 – 6 L/min (1.5 USgpm) 20 – 8 L/min (2 USgpm) 25 – 9,5 L/min (2.5 USgpm) 30 – 11 L/min (3 USgpm) 35 – 13 L/min (3.5 USgpm) 40 – 15 L/min (4 USgpm) 45 – 17 L/min (4.5 USgpm) 50 – 19 L/min (5 USgpm) 55 – 21 L/min (5.5 USgpm) 60 – 23 L/min (6 USgpm) 65 – 25 L/min (6.5 USgpm) 70 – 26,5 L/min (7 USgpm) 75 – 28 L/min (7.5 USgpm) | 05 – 35 bar ( 500 psi) 07 – 52 bar (750 psi) 10 – 70 bar (1000 psi) 12 – 86 bar (1250 psi) 15 – 100 bar (1500 psi) 17 – 120 bar (1750 psi) 20 – 140 bar (2000 psi) | F – Filter instead of standard baffle. Omit if not required. | 07 – 1147 mL (70 in3) reservoir (Omit for VTM42A) 11 – 1884 mL (115 in3) reservoir (Omit for VTM42A) MA – Manifold without bypass tube MB – Manifold with bypass tube MD – Manifold with 90° tank connection ME – Cast manifold without bypass tube MF – Cast manifold with bypass tube NO – None (shipping closure only) | R–Right hand (clockwise) L–Left hand (counterclockwise) | 1 – Threaded (VTM42 only) 38 – Splined (VTM42A only) | Subject to change. Installation dimen - sions remain the same for designs –10 through –19. | |
复制产品链接
长按图片保存/分享
分享:
点击右上角
分享给朋友吧
宁波金德液压技术有限公司
微信：0086-18067240587
WhatsApp:.0086-18058289757 (Ms. Carol)
电话: 0086-574-88129537
传真: 0086-574-88129517
邮箱: sales@kindehyd.com
网址: www.kindehyd.com
地址: 浙江省宁波市鄞州区姜山镇联东U谷·鄞工智能制造产业园31#B3楼
版权所有 © 2023 .宁波金德液压技术有限公司 .技术支持：彗星网络
